Yamaha ESB-1090 Installation Guide

1
Front Surround System
Installation Guide
EN
This manual describes how to use the setup file to set the modes of the unit in detail.
Read the “ESB-1090 Owner’s Manual” for information on how to set the modes of the unit without using the setup file.
Step 1: Create the setup file
Please prepare the following items.
• Setup file creation tool (Name: ESB-1090_Create_SetupFile.xlsm)
• USB flash drive (empty)
1-1. Open the setup file creation tool.
The following screen appears.

Yamaha ESB-1090 Specifications

General

Audio decoders	DTS TruSurround, DTS:X
RMS rated power	120 W
Audio output channels	- channels
Audio Return Channel (ARC)	Yes
Wi-Fi	-
HDMI in	1
HDCP version	2.3
Connectivity technology	Wired & Wireless
Subwoofer location	Built-in
Product color	Black
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	30 - 90 %
High Dynamic Range (HDR) technology	High Dynamic Range 10 (HDR10)
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.2 W
Power consumption (typical)	30 W
Cables included	AC, Optical
Number of products included	1 pc(s)
Tweeter diameter	25 mm
Tweeter diameter (imperial)	1 \

Weight and Dimensions

Depth	131 mm
Width	890 mm
Height	53 mm
Soundbar weight	3400 g