Why no audio output from Yamaha Extender?
If the [OUTPUT SIGNAL] indicator is not lighting, several things could be happening. First, check if the output level has been lowered. Next, verify that the channel's ON button is activated in the system’s dedicated application software. Also, confirm that the signal routing is correctly specified. Finally, ensure that settings like patch, gain, or level in the software are properly configured.
What to do if Yamaha Extender EXi8/EXo8 is not shown in the dedicated application software?
If you cannot exchange data between the EXi8/EXo8 and the system's application software, start by checking if the NETWORK connector on the EXi8/EXo8 is correctly connected to your computer. Then, verify that you have specified the correct UNIT ID using the rotary switch and DIP switches on the rear panel, ensuring it doesn't conflict with another device. Finally, set DIP switch 6 (IP SETTING) to 'UNIT ID' on the rear panel to allow the IP address to be automatically assigned according to the UNIT ID.
How to fix no audio input on Yamaha Extender?
If the [INPUT SIGNAL] indicator is not lighting, ensure the cable is properly connected. Confirm that an external device is sending a signal. Adjust the gain of the internal or external head amplifier to an appropriate level.
What to do if Yamaha EXi8 doesn't turn on?
If the device doesn't turn on or the panel LEDs don't light up, ensure the power cord is properly connected and the power switch is turned on. If the power still doesn't turn on, contact your Yamaha dealer.
Why [YDIF] indicator does not light on Yamaha Extender?
If the [YDIF] indicator does not light, verify that you are using the correct cable for YDIF connections between the EXi8/EXo8 and other devices. Also, confirm that the devices connected via YDIF are powered on.
What does it mean when the [ALERT] indicator is flashing on Yamaha EXi8?
When the [ALERT] indicator is flashing, it indicates an error. Check the [INPUT SIGNAL] or [OUTPUT SIGNAL] indicator that corresponds to the alert number. Refer to the 'Alert list' on page 13 to determine the problem and take appropriate action.
Covers critical safety warnings for power, water, fire, and general handling.
Describes key features like YDIF digital audio transmission and installation flexibility.
Details the function of indicators and the power switch on the front panel.
Describes setting UNIT ID with rotary switch and DIP switches for startup and ID configuration.
Covers IP settings, startup modes, network, and YDIF connectors on the rear panel.
Advises on precautions for installing the device in an EIA rack for proper ventilation.
Step-by-step guide to initialize the device and restore factory settings.
Explains alerts for startup errors, lost presets, and word clock master issues.
General| Category | Extender |
|---|---|
| Channels | 8 |
| Input Channels | 8 |
| Output Channels | 8 |
| Network | Dante |
| Frequency Range | 20 Hz - 20 kHz |
| Power Supply | AC 100-240V, 50/60Hz |
| Operating Temperature | 0 - 40 °C |
| Weight | 4.2 kg |
To Next Page