4-23
E
EJU18250
Replacing the fuse
The fuse is in the electrical box 1.
To replace the fuse:
1. Remove the cap 2.
2. Replace the fuse 4 with the spare
fuse 5 of the correct amperage by using
the special tool 3 on the reverse side of
the cap.
WARNING
@
Do not use fuses of higher amperage
than those recommended. Substitution
of a fuse of improper rating can cause
extensive electrical system damage and
possible fire.
@
Fuse amperage:
20 A (main)
3 A (meter)
3 A (bilge pump)
UF1S10.book Page 23 Wednesday, December 17, 2003 1:11 PM
To Next Page
Loading...
