EasyManuals Logo

Yamaha FX High Output WaveRunner 2004 User Manual

Yamaha FX High Output WaveRunner 2004
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #49 background imageLoading...
Page #49 background image
2-18
E
The SECURITY indicator light 4 comes
on when the security system is in the unlock
mode and goes off when the security sys-
tem is in the lock mode.
When the unlock button 3 is pressed for
a short time, the beeper sounds two times
for the normal mode or three times for the
low-RPM mode. The SECURITY indicator
light will come on and the engine can be
started. (See the items in Selecting the nor-
mal mode/low-RPM mode for operation
mode information.)
Selecting the normal mode/
low-RPM mode
The normal mode and low-RPM mode
can only be selected when the engine is
stopped in the unlock mode. Press the
unlock button for more than 4 seconds to
select the normal mode or low-RPM mode.
Normal mode
If the beeper sounds twice, the normal
mode is activated.
The watercraft can be ridden normally.
Low-RPM mode
If the beeper sounds three times, the
low-RPM mode is activated and the
L-MODE indicator light 5 comes on.
Maximum engine speed (r/min) in the
low-RPM mode is limited to approximately
80% of the maximum engine speed in the
normal mode.
Number of
beeps
Yamaha Security
System mode
Engine can
be started
1 beep Lock NO
2 beeps
Unlock
(normal mode)
YES
3 beeps
Unlock
(low-RPM mode)
YES
UF1S10.book Page 18 Wednesday, December 17, 2003 1:11 PM

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yamaha FX High Output WaveRunner 2004 and is the answer not in the manual?

Yamaha FX High Output WaveRunner 2004 Specifications

General IconGeneral
BrandYamaha
ModelFX High Output WaveRunner 2004
CategoryBoat
LanguageEnglish

Related product manuals