EasyManuals Logo

Yamaha FX High Output WaveRunner 2007 User Manual

Yamaha FX High Output WaveRunner 2007
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #107 background imageLoading...
Page #107 background image
Trouble recovery
102
(6) Spray a rust inhibitor such as Yamaha
Stor-Rite Engine Fogging Oil into each
spark plug hole for 5 seconds.
(7) Crank the engine for 5 seconds at wide
open throttle. Repeat this step several
times.
(8) Install the spark plugs, and then connect
the spark plug caps and fuel injector cou-
plers.
CAUTION:
ECJ00780
Do not start the engine even after complet-
ing the previous steps. Any water remain-
ing in the engine could cause serious
engine damage.
(9) Have the watercraft inspected by a
Yamaha dealer as soon as possible.
CAUTION:
ECJ00790
Be sure to have a Yamaha dealer inspect
the watercraft. Otherwise, serious engine
damage could result.
UF1X11E0.book Page 102 Monday, August 7, 2006 3:51 PM

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yamaha FX High Output WaveRunner 2007 and is the answer not in the manual?

Yamaha FX High Output WaveRunner 2007 Specifications

General IconGeneral
BrandYamaha
ModelFX High Output WaveRunner 2007
CategoryBoat
LanguageEnglish

Related product manuals