Features and functions
30
To install the front seat:
(1) Insert the projections on the front of the
seat into the stays on the deck, and then
push the rear of the seat down to lock it in
place.
(2) Install the rear seat.
NOTE:
Make sure that the seats are securely in-
stalled before operating the watercraft.
EJU31061
Hood
To open the hood, push the hood latch down,
and then lift up the hood.
To close the hood, push the hood down to
lock it in place.
NOTE:
Make sure that the hood is securely closed
before operating the watercraft.
1 Hood latch
UF1X11E0.book Page 30 Monday, August 7, 2006 3:51 PM
To Next Page
Loading...
