Features and functions
39
When the lock button on the remote control
transmitter is pressed, the beeper sounds
once. This indicates the lock mode is selected
and the engine cannot be started.
The “UNLOCK” indicator light comes on when
the security system is in the unlock mode and
goes off when the security system is in the
lock mode.
When the unlock button on the remote control
transmitter is pressed for a short time, the
beeper sounds two times for the normal mode
or three times for the low-RPM mode. The
“UNLOCK” indicator light will come on and the
engine can be started. (See the items in “Se-
lecting the normal mode/low-RPM mode” for
operation mode information.)
EJU36220
Selecting the normal mode/low-RPM
mode
The normal mode and low-RPM mode can
only be selected when the engine is stopped
in the unlock mode. Press the unlock button
on the remote control transmitter for more
than 4 seconds to switch between the normal
mode and the low-RPM mode.
Normal mode
If the beeper sounds twice, the normal mode
is activated.
The watercraft can be ridden normally.
1 Lock button
1 “UNLOCK” indicator light
1 Unlock button
Number
of beeps
Yamaha Security Sys-
tem mode
Engine
can be
started
1 beep Lock NO
2 beeps
Unlock
(normal mode)
YES
3 beeps
Unlock
(low-RPM mode)
YES
UF1X11E0.book Page 39 Monday, August 7, 2006 3:51 PM
To Next Page
Loading...
