EasyManuals Logo

Yamaha FX High Output WaveRunner 2007 User Manual

Yamaha FX High Output WaveRunner 2007
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #77 background imageLoading...
Page #77 background image
Operation
72
EJU35230
Boarding alone
(1) Swim to the rear of the watercraft and
place both hands on the boarding plat-
form, pull yourself up, and then grasp the
handgrip with one hand.
(2) Pull yourself up to a kneeling position on
the platform, and then move to the seat
and sit astride.
(3) Attach the engine shut-off cord to your left
wrist, and then attach the clip to the en-
gine shut-off switch.
(4) Grip the handlebars with both hands,
place both feet on the floor of the footwell,
start the engine, and then look in all direc-
tions before starting off.
NOTE:
If your watercraft is equipped with the re-
boarding step, you can lower the step to make
reboarding easier. The step returns automati-
cally to the up position after you have board-
ed.
WARNING
EWJ00610
Before starting off, make sure that there
are no boats, swimmers, or obstacles
around you.
EJU33161
Boarding with passengers
WARNING
EWJ00660
Severe internal injuries can occur if water
is forced into body cavities as a result of
being near the jet thrust nozzle. Do not ap-
ply throttle until the passengers are seated
with their feet on the floor of the footwell
and are securely holding on to the person
in front of them or to the handgrip provid-
ed.
UF1X11E0.book Page 72 Monday, August 7, 2006 3:51 PM

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yamaha FX High Output WaveRunner 2007 and is the answer not in the manual?

Yamaha FX High Output WaveRunner 2007 Specifications

General IconGeneral
BrandYamaha
ModelFX High Output WaveRunner 2007
CategoryBoat
LanguageEnglish

Related product manuals