Yamaha FX SHO WaveRunner 2013 User Manual

First-time operation
64
EJU36665
Engine break-in
NOTICE
ECJ00431
Failure to perform the engine break-in
could result in reduced engine life or even
severe engine damage.
The engine break-in is essential to allow the
various components of the engine to wear
and polish themselves to the correct operat-
ing clearances. This ensures proper perfor-
mance and promotes longer component life.
To perform the engine break-in:
(1) Check the engine oil level. (See page 60
for information on checking the engine oil
level.)
(2) Launch the watercraft and start the en-
gine. (See page 76 for information on
starting the engine.)
(3) For the first 5 minutes, operate with the
engine speed at 2000 r/min.
(4) For the next 30 minutes, operate with the
engine speed below 5000 r/min.
(5) For the next 1 hour, operate with the en-
gine speed below 6000 r/min.
After the engine break-in is complete, the wa-
tercraft can be operated normally.
UF2S71E0.book Page 64 Tuesday, August 21, 2012 2:33 PM

Yamaha FX SHO WaveRunner 2013 Specifications

General

Manufacturer	Yamaha
Model	FX SHO WaveRunner
Year	2013
Category	Personal Watercraft
Displacement	1812 cc
Bore x Stroke	86 mm x 78 mm
Starting System	Electric
Lubrication System	Wet sump
Cooling System	Water-cooled
Fuel Type	Regular unleaded
Fuel Capacity	18.5 gallons
Width	48.4 inches
Height	45.3 inches
Engine Type	4-stroke, 4-cylinder
Fuel Delivery System	Electronic Fuel Injection (EFI)
Rider Capacity	3 persons