Need help?Do you have a question about the Yamaha GranTouch GT20 and is the answer not in the manual?
General| Type | Digital Piano |
|---|---|
| Keyboard Action | Graded Hammer Action |
| Voices Count | 10 |
| Effects | Reverb, Chorus |
| Recorder | Yes |
| Speakers | Yes |
| Amplifier | Yes |
| Keyboard | 88 keys |
| Sound Engine | AWM (Advanced Wave Memory) |
| Sound Source | Stereo Samples |
| Polyphony | 64 notes |
| Speaker Size | 16 cm x 2 |
| Amplifier Power | 20W |
| Pedals | Damper, Sostenuto, Soft |
| MIDI | In/Out |
| Connectivity | MIDI In/Out |
| Finish | Polished Ebony |
Describes the controller integrated into the front top board of the MX100 model.
Explains the three main categories of key sensors: Hammer, Key, and Pedal sensors.
Details the different types of hammer sensors, including 1-beam 2-points and 1-beam 4-points.
Describes variations in pedal sensors: ON/OFF switch-type and grayscale-type.
Explains principles for adjusting shank stop and let-off positions for silent mode.
Details adjustment steps for rotary type shank stoppers and let-off positions.
Provides adjustment procedures for motor-driven type shank stoppers.
Explains how to adjust the shank stopper angle for proper silent operation.
Details procedures for adjusting regulating rods for silent operation.
Guides on measuring pedal stroke (a-d) and half-point (HP or c, d).
To Next Page