Need help?Do you have a question about the Yamaha KP100 and is the answer not in the manual?
General| Designed for | Drum |
|---|---|
| Product type | Drum pedal |
| Product color | Black, White |
Weight and Dimensions| Depth | 288 mm |
|---|---|
| Width | 340 mm |
| Height | 464 mm |
| Weight | 5000 g |
Basic precautions to avoid serious injury or death from electrical shock, fire, or other hazards.
Basic precautions to avoid physical injury or damage to the instrument or other property.
Details the size, weight, sensing method, and connectors for the KP100 kick pad.
Attach the base to the main body using provided bolts and washers, do not fully tighten yet.
Connect the foot pedal, adjust for vertical pad surface and stability, then tighten bolts.
Position the pedal and adjust beater shaft length for central kick pad impact.
Connect KP100 OUTPUT to a DTX Series tone generator module using a stereo phone cable.
Use the PAD INPUT jack to add an additional mono pad, connecting its trigger output.
Ensure correct connection, check/increase pad's output level, or adjust module's Minimum Level.
Check/reduce pad's output level to avoid excessively high signals causing multiple triggers.
To Next Page
