Need help?Do you have a question about the Yamaha LEXI and is the answer not in the manual?
General| Fuel System | Fuel Injection |
|---|---|
| Front Suspension | Telescopic Fork |
| Rear Suspension | Unit Swing |
| Fuel Tank Capacity | 4.2 L |
| Lubrication System | Wet Sump |
| Ignition System | TCI |
| Frame Type | Underbone |
| Starter System | Electric |
| Transmission Type | Automatic V-belt |
| Front Brake | Single disc |
| Rear Brake | Drum |
| Clutch Type | Automatic centrifugal |
| Rear Tire | 100/90-10 56J |
Owner responsibilities for safe and proper operation, including training and adherence to manual.
Pre-operation checks, visibility, intersection caution, blind spots, and maintenance.
Importance of helmets, face shields, jackets, shoes, and gloves for injury prevention.
Guidelines for selecting and wearing approved motorcycle helmets for head injury prevention.
Overview of the smart key system, its functions, and potential interference.
Guidelines for handling smart keys, mechanical keys, and identification cards securely.
How to activate, use, and deactivate the Stop and Start System for fuel efficiency.
Safety warnings and precautions when using the Stop and Start System.
Procedure for starting the engine, including pre-start checks and indicator lights.
Steps for safely starting off, including mirror adjustment and throttle control.
Techniques for safe braking, including avoiding sudden stops and wet conditions.
Break-in procedures for the engine during the first 1000 km to ensure longevity.
Safe parking procedures, including turning off the power and considering exhaust heat.
Essential checks for tires, including tread depth, air pressure, and replacement.
Inspection of brake pads and shoes for wear using indicator grooves.
General troubleshooting steps for common vehicle problems.
Common issues and checks when the smart key system is not working.
Troubleshooting common issues with the Stop and Start System indicator light.
Diagnostic flowcharts for starting issues related to fuel, battery, ignition, and compression.
Steps to take when the engine overheats, including safety precautions.
Procedure to operate the vehicle in emergency mode using the identification number.
To Next Page