Yamaha LS2000 Owner's Manual

Storing
In The Upright Position
1) Raise the rear support poles to the
highest position.
2) Unhook the front straps and pull the
top to the back.
3) Roll the fabric around the frames
and zip the storage cover in place.
Do not trailer the boat with the
Bimini top in the fully extended or
upright storage positions. Put the
cover in the fully collapsed position
to avoid damage.
Storing
In The Fully Collapsed Position
1) Follow the steps for storing in the
upright position.
2) Remove the snap pins holding the
rear support poles to the mounting
brackets.
3) Lower the top onto the rear
deck/hatch.
4) Secure the rear support poles to the
main poles with the Velcro straps.
Trailering With The Bimini Top
The Bimini top must be secured to the
boat when it is being trailered. When
trailered with a Genuine Yamaha
Cover, simply store the Bimini top in
the fully collapsed position and install
the cover. If a cover is not used, wrap
an elastic cord around the top and
secure the ends to the ski tow hook to
restrict movement.
Removing the Bimini Top
1) Follow the steps for storing in the
fully collapsed position.
2) Remove the lock pins holding the
Bimini top to the mounting brackets.
3) The top can now be removed from
your Sport Boat.
When reinstalling the Bimini top, simply
reverse the removal steps making sure
the lock pins are fully engaged.
NOTE: The adjustable support pole
goes to the stern when reinstalling the
Bimini top.
3-12
3 OPERATION
CAUTION:

Yamaha LS2000 Specifications

General

Brand	Yamaha
Model	LS2000
Category	Boat
Language	English