Instrument and control functions
4-6
4
EAU87580
Multi-function display
The multi-function display is equipped
with the following:
z an odometer (ODO)
z two tripmeters (TRIP 1 and TRIP 2)
z a fuel reserve tripmeter (TRIP F)
z an oil change tripmeter (OIL TRIP)
z an oil change indicator
z an instantaneous fuel consump-
tion display (km/L, L/100 km, or
MPG)
z an average fuel consumption dis-
play (AVE_ _._ km/L, AVE_ _._
L/100 km, or AVE_ _._ MPG)
Push the “SELECT” button to change
the display in the following order:
ODO → TRIP 1 → TRIP 2 → TRIP F →
km/L, L/100 km or MPG → AVE_ _._
km/L, AVE_ _._ L/100 km or AVE_ _._
MPG → OIL TRIP → ODO
The fuel reserve tripmeter appears only
when you are low on fuel.
EAU86890
Odometer
The odometer shows the total distance
traveled by the vehicle.
The odometer will lock at 999999 and
cannot be reset.
EAU88050
Tripmeters
The tripmeters show the distance trav-
eled since they were last reset.
To reset a tripmeter, change the dis-
play to the tripmeter you want to reset,
and then push the “RESET” button un-
til it is reset.
The tripmeters will reset and continue
counting after 9999.9 is reached.
EAU87600
Fuel reserve tripmeter
If the last segment of the fuel meter
starts flashing, the display automati-
cally changes to the fuel reserve trip-
meter “TRIP F” and starts counting the
distance traveled from that point.
To reset the fuel reserve tripmeter,
push the “RESET” button until it is re-
set.
If you do not reset the fuel reserve trip-
meter manually, it will reset automati-
cally and disappear from the display
after refueling and traveling 5 km (3 mi).
1. Multi-function display
UB5W10E0.book Page 6 Friday, March 27, 2020 12:34 PM
To Next Page
Loading...
