Oecarbonization (DT2
and
RT2
only)
To remove the inner cylinder from the muffler, remove the set screw
and
pull
out
the
tail pipe.
Remove
carbon with a wire brush.
Check
the inner bore for carbon. If
it
1s
clogged, clean
it
with a
w,
re.
Cleaning the Combustion chamber and
Piston
Carbon
accumulation covering the combustion chamber
and
piston will result
rn
loss of power, engine knock, overheating,
and
other problems.
a.
Remove the cylinder head and remove carbon from the combustion chamber.
b.
Remove carbon from the piston
head.
To
clean them, use a scraper
and
rags dampened with solvent.
c.
The head bolts must
be
torqued
when
the
head
is reinstalled. Torque the
bolts
in
pattern
to
a setting of
300
in/lbs.
-33
-
To Next Page
Loading...
