Need help?Do you have a question about the Yamaha NS-1000 and is the answer not in the manual?
Describes how to connect speaker input terminals using push-type connectors, noting red for plus and black for minus.
Details the speaker impedance and connection advice for transistor/tube amplifiers, specifying 8 ohm terminals.
Describes how to connect speaker input terminals using push-type connectors, noting red for plus and black for minus.
Details the speaker impedance and connection advice for transistor/tube amplifiers, specifying 8 ohm terminals.
General| Impedance | 8 Ohms |
|---|---|
| Sensitivity | 90 dB/W/m |
| Crossover Frequencies | 500 Hz, 6 kHz |
| Maximum Input Power | 100W |
| Frequency Response | 40Hz to 20kHz |
| Woofer | 30 cm (12") cone |
| Tweeter | 3cm dome type |
| Midrange | 8.8 cm (3.5") dome |
| Dimensions | 375 x 675 x 326mm |
To Next Page
