Need help?Do you have a question about the Yamaha NS-10M STUDIO and is the answer not in the manual?
General| Frequency Response | 60 Hz - 20 kHz |
|---|---|
| Crossover Frequency | 2 kHz |
| Nominal Impedance | 8 ohms |
| Woofer | 180 mm cone |
| Dimensions (W x H x D) | 215 x 382 x 199 mm |
| Weight | 6.3 kg |
| Sensitivity | 90 dB |
| Maximum Input Power | 60 W |
| Type | 2-way, bass-reflex |
| Tweeter | 35 mm dome |
18 cm (7") woofer with a conical, straight cone for precise pistonic motion and accurate, distortion-free reproduction.
3.5 cm (1-3/8") tweeter dome is a laminated soft-dome type for superb transient response.
Sealed bookshelf-type enclosure made of high-density particle board with a real-wood exterior.
Low-distortion inductors and selected MP capacitors for smooth crossover with minimum loss.
Large screw-type terminals accept heavy-gauge speaker cable for optimum reproduction.
Connect speaker terminals on the left and right speakers to corresponding amplifier outputs, matching polarity (+/-).
Speakers designed for horizontal placement, but can be reversed or placed vertically without affecting quality.
Presents charts showing frequency response and harmonic distortion for the speaker system.
Presents a chart illustrating the impedance characteristics of the speaker system across frequencies.
To Next Page
