Do you have a question about the Yamaha PW50(N) and is the answer not in the manual?
Displacement | 49cc |
---|---|
Ignition System | CDI |
Final Drive | Chain |
Rear Brake | Drum |
Bore x Stroke | 40.0mm x 39.2mm |
Fuel System | Mikuni VM12 carburetor |
Transmission | Automatic |
Front Suspension | Telescopic fork |
Rear Suspension | Swingarm |
Front Tire | 2.50-10 4PR |
Rear Tire | 2.50-10 4PR |
Starting System | Kick |
Identifies key parts of the motorcycle with numbered diagrams.
Explains the operation of the engine start/stop switch.
Details the on/off positions for fuel supply and operation.
Describes brake levers and the function/adjustment of the speed limiter.
Details operation of starter lever, kick starter, and fuel tank cap.
Specifies fuel types, oil grades, capacities, and service details.
Lists essential checks for brakes, transmission, spark plug, throttle, air filter, wheels, and fasteners.
Guides starting a cold/warm engine and the initial break-in period.
Outlines maintenance tasks, intervals, and lubrication schedules.
Lists essential tools for engine and electrical service.
Instructions for checking and adjusting spark plug gap.
Procedure for cleaning the air filter element.
Guides adjustment of throttle cable free play.
Details on adjusting idle speed and pilot air screw.
Details servicing procedures like air bleeding and cable adjustment.
Details maintenance and repair procedures for the engine.
Explains carburetor removal, inspection, and adjustment.
Procedures for disassembly and inspection of cylinder head and piston.
Details clutch removal and inspection of components.
Procedures for wheel and tire removal, installation, and inspection.
Inspects brake shoes, drums, and rim for wear and damage.
Provides troubleshooting charts and guides for common issues.
Detailed steps for washing, drying, and preparing the machine for storage.
Guides on diagnosing no spark, weak spark, and poor acceleration issues.
Details technical specifications for engine and carburetor components.