Need help?Do you have a question about the Yamaha R-2000 and is the answer not in the manual?
General| Power Output | 150 watts per channel into 8Ω (stereo) |
|---|---|
| Frequency Response | 20Hz to 20kHz |
| Signal to Noise Ratio (MC) | 75dB |
| Signal to Noise Ratio (line) | 100dB |
| Tuning Range | FM, MW |
| Input Sensitivity (MM) | 2.5mV |
| Input Sensitivity (line) | 150mV |
| Channel Separation (line) | 70dB |
| Speaker Load Impedance | 4Ω to 16Ω |
Key instructions for initial setup, placement, and safe operation of the receiver.
Identifies and describes major front panel controls like Power, Volume, Input Selector, and Tuning.
Step-by-step instructions for tuning AM and FM stations using auto-scan and preset functions.
Lists common audio faults, their causes, and corrective actions for power, sound, and hum issues.
Addresses FM reception issues like noisy stereo, distortion, and AM reception problems like crackling.
Detailed performance metrics for audio output, input sensitivity, impedance, distortion, and frequency response.
Performance data for FM/AM tuning range, sensitivity, selectivity, signal-to-noise, and distortion.
To Next Page
