Need help?Do you have a question about the Yamaha RA700T 1995 and is the answer not in the manual?
General| Year | 1995 |
|---|---|
| Category | Boating Equipment |
| Model | RA700T |
| Manufacturer | Yamaha |
| Fuel Type | Gasoline |
Details for identifying the watercraft, engine, and pump serial numbers.
Essential safety precautions, warnings, and guidelines for handling fuel, ventilation, and personal protection.
Recommendations for using correct tools, proper tightening, and clean disassembly/assembly procedures.
General procedures for disassembling and reassembling components, including lubrication and checks.
Lists and illustrations of specialized tools required for maintenance and repairs.
Comprehensive overview of model dimensions, performance, engine, and drive unit specifications.
Detailed specifications for engine parts like cylinder, piston, crankshaft, and carburetor for maintenance.
Specifies correct torque values for various engine and jet unit fasteners to ensure secure assembly.
Outlines recommended inspection and service intervals for all major systems of the watercraft.
Procedures for inspecting and adjusting steering, throttle, and choke cables for optimal performance.
Steps for inspecting and adjusting fuel filters, trolling speed, and carburetors for efficient fuel delivery.
Instructions for inspecting and bleeding the oil injection system for proper lubrication.
Procedures for inspecting spark plugs, cooling passages, and mounting components of the power unit.
Guidelines for inspecting the battery, including fluid levels, specific gravity, and terminal connections.
Instructions for inspecting the jet pump impeller, bearings, and bilge strainer for wear and damage.
Covers general inspection points such as drain plugs, O-rings, and greasing points for overall maintenance.
Exploded diagrams and charts for removing/installing fuel line components and inspecting fuel system parts.
Detailed diagrams and procedures for removing and installing the oil and fuel tanks.
Exploded diagrams and charts for removing and installing carburetors for RA700, RA700A, and RA1100 models.
Detailed diagrams and service points for inspecting and adjusting carburetor components like jets and screws.
Exploded diagram and installation chart for the fuel pump assembly, including inspection points.
Diagrams and procedures for removing, installing, and inspecting the oil pump and its hoses.
Exploded diagram and chart for removing the entire engine unit, including notes on shims and alignment.
Diagrams and procedures for removing, installing, and inspecting reed valves for proper sealing and bending.
Exploded diagrams and charts for removing and installing the exhaust ring, with torque specifications.
Diagrams and charts for removing and installing the exhaust chamber, including disassembly steps and torque values.
Exploded diagrams and charts for removing and installing the muffler, with torque specifications.
Detailed diagrams and procedures for inspecting and servicing cylinder head, cylinder bore, and piston measurements.
Exploded diagrams and charts for removing and installing the flywheel magneto and base assembly.
Diagrams and procedures for flywheel cover and magneto removal/installation and related inspections.
Exploded diagrams and charts for crankcase and crankshaft removal/installation, including inspection points.
Diagrams and procedures for removing, installing, and inspecting the intermediate shaft and housing.
Exploded diagram and chart for removing the jet pump unit, including torque specifications and notes.
Diagrams and charts for removing/installing the nozzle, duct, and intake components, with torque values.
Exploded diagram and chart for impeller and drive shaft removal/installation, including bearing and seal procedures.
Diagrams and charts for the cooling and bilge systems, including hose and strainer inspections.
Diagrams showing the location of electrical components like sensors, leads, and connectors on the watercraft.
Wiring diagrams and troubleshooting for ignition system components like pulser coil, CDI, and spark plugs.
Diagrams and checks for the starting system, including fuse, battery connections, starter switch, and relay.
Exploded diagram and procedures for inspecting the starter motor's pinion, armature, brush holder, and cover.
Wiring diagram and inspection of the charging system components like fuse, battery, lighting coil, and regulator.
Diagrams and checks for oil level, fuel level, and multi-function meters, and their sensor connections.
Exploded diagram and chart for removing the engine hood, including notes on cable management.
Diagrams and procedures for removing/installing handlebars, grips, and related controls.
Exploded diagrams and charts for the trim control grip and cable, including inspection and adjustment.
Diagrams and procedures for removing/installing the handle column, including steering and bearing checks.
Exploded diagram and chart for engine hood components, including hood support and lock hook inspection.
Diagrams and charts for steering, throttle, and choke cables, including removal, installation, and adjustment.
Exploded diagram and chart for the trim cable, including removal, installation, and inspection.
Diagrams and charts for seat, storage, fire extinguisher, and battery case removal and inspection.
Exploded diagrams and charts for the exhaust system, including muffler and pipe connections.
Diagrams and charts for the flushing and ventilation systems, including hose and joint inspections.
Exploded diagram and chart for deck components, including various fasteners and covers.
Diagrams and charts for gunwale and mat removal and installation, including inspection points.
Diagrams and procedures for hull disassembly, repair (scratching, damage), and graphic application.
General notes on troubleshooting, including battery status and wiring connections.
A detailed chart correlating trouble modes with specific check elements and reference chapters.
To Next Page