PRE-OPERATION CHECKS
Item Routine
Brakes Check operation/adjustment/brake fluid/brake pads
Clutch Check operation/lever adjustment
Autolube tank Check
oil
level/top-up
as
required
Transmission
Check
oil
level/top-up
as
required
Drive chain
Check alignment/adjustment/lubrication
Throttle Check
for
proper throttle
and
Autolube cable Operation
Air filter
Foam type—must
be
clean
and
damp with
dil
always
Wheels
and
tires
Check pressure/wear
Fittings/fasteners Check
all—
tighten
as
necessary
Lights/signals
Check headlight/tail-brake lights
Battery Check fluid level, top-up with distilled water
if
necessary.
NOTE:
Pre-operation checks should be made each time the machine is used. Such an inspection can
be thoroughly accomplished in a very short time; and the added safety it assures is more than
worth the time involved.
-
29 -
Before using this motorcycle check the following points:
To Next Page
Loading...
