To Next PageTo Next Page
Need help?Do you have a question about the Yamaha SM15IV and is the answer not in the manual?
General| Power Handling | 400 W (Program), 800 W (Peak) |
|---|---|
| Impedance | 8 Ohms |
| Woofer | 15" cone |
| Crossover Frequency | 2.0 kHz |
| Frequency Response | 50 Hz - 20 kHz (-10dB) |
| Sensitivity | 98 dB SPL (1W @ 1m) |
| Tweeter/Compression Driver | 1" compression driver |
Advice on avoiding heat, humidity, dust, vibration, and ensuring correct power-up sequences.
Guidelines for safe cable connections, disconnections, and system movement.
Explanation of the self-resetting poly switch protecting the high-frequency driver.
Precautions for mounting speakers on stands to prevent falling and injury.
Information regarding ATM Fly-Ware rigging hardware and general suspension safety.
Clarification that speaker handles are for transport, not for suspension or hanging.
Diagram illustrating audio connections for a standard two-speaker system setup.
Instructions on connecting multiple speaker systems in parallel for daisy-chaining.
Details on wiring for standard 1/4" phone jack input terminals.
Diagram for connecting subwoofers with a crossover network.
Graphs detailing the frequency response and impedance characteristics of the speaker models.
Polar plots illustrating the horizontal directivity patterns of the speaker systems at various frequencies.
Polar plots illustrating the vertical directivity patterns of the speaker systems at various frequencies.
