Do you have a question about the Yamaha SM10IV-OAK and is the answer not in the manual?
Frequency Response (-10dB) | 55Hz-20kHz |
---|---|
Power Handling (RMS) | 60W |
Nominal Impedance | 8 ohms |
Crossover Frequency | 2.5kHz |
Type | 2-way bass-reflex |
Components | 1 x Woofer, 1 x Tweeter |
Woofer | 20cm (8") cone |
Tweeter | 2.5cm (1") dome |
Sensitivity | 96dB SPL |
Dimensions (H x W x D) | 21.9" x 13.8" x 12.8" |
Enclosure Material | Plywood |
Guidelines for safe placement, power handling, connections, and cable management to prevent equipment damage.
Information on system polarity, preventing speaker damage, and the Poly Switch operation.
Safety advice for speaker mounting, suspension, and operating at safe volume levels.
Illustrates standard audio connections and explains the procedure for daisy-chaining speaker systems.
Details phone plug wiring and provides a critical caution regarding the use of appropriate speaker cables.
Shows audio connections for a system using SW118IV Subwoofers and a PN90 Crossover Network.
Provides critical notes on connecting the PN90, its load impedance, and polarity correction for LOW/HIGH signals.
Detailed specifications for SM10IV, SM12IV, SM15IV series speakers, including dimensions and weight.
Technical specifications for the SW118IV Subwoofer and PN90 Crossover Network, including dimensions.
Presents frequency response and impedance graphs for SM10IV, S112IV, S115IV, and SW118IV models.
Displays horizontal directivity patterns for SM10IV, SM12IV, and SM15IV speaker models at various frequencies.
Presents vertical directivity patterns for SM10IV, SM12IV, and SM15IV speaker models across different frequencies.