Instrument and control functions
4-9
4
speed, apply the brakes. When
the brakes are applied, the cruise
control system will become deac-
tivated.
Self-diagnosis device
The cruise control system will also be-
come deactivated when an irregularity
with any of the vehicle systems is de-
tected. The “SET” indicator light will go
off and the “ ” indicator light will
flash. You will not be able to use the
cruise control system while the engine
trouble warning light is on, or while the
cruise control system is malfunction-
ing.
EWA16361
If the cruise control system is not
working correctly, the “ ” indicator
light will flash. If this occurs, turn the
cruise control system off and have a
Yamaha dealer check it.
ECA11591
If the display indicates an error co-
de, the vehicle should be checked as
soon as possible in order to avoid
engine damage.
EAU59099
Multi-function meter unit
EWA12423
Be sure to stop the vehicle before
making any setting changes to the
multi-function meter unit. Changing
1. Cruise control system indicator light “ ”
2. Cruise control setting indicator light “SET”
3. Engine trouble warning light “ ”
4. Error code display
GEAR
N
25
A.TEMP ˚C
Lo
C.TEMP ˚C
0:00
TIME TRIP
1. “RESET” button
2. “TCS” button
3. Clock
4. Tachometer
5. Speedometer
6. Transmission gear indicator
7. Information display selection function
8. Information display
9. Fuel meter
10.Eco indicator “ECO”
11.Drive mode indicator
12.Traction control system indicator
GEAR
N
25
A.TEMP ˚C
Lo
C.TEMP ˚C
0:00
TIME TRIP
U2BS73E0.book Page 9 Monday, September 12, 2016 2:14 PM
To Next Page
Loading...
Need help?
General
