Yamaha TX7 - MIDI Dump and Initialize Functions; Voice Initialize Function

MIDI
OPERATIONS
Although we have already used many of the
MIDI functions
available
on the TX7 in the operations described in
the
preceding
sections of
this manual, this section will provide a summary of the
operation for each
MIDI
function.
-
Pressing
the
MIDI
MODE button
in the
SHIFT
mode accesses
the
following
MIDI
MODEFunctions
functions:
"D.
ENTRY RCV. OFF"
When this function is
ON,
the TX7 is capable of receiving data via the
DX
synthesizer
DATA ENTRY control. This
capability is used
for editing TX7 function parameters
via
the
DX DATA ENTRY
control.
This
function is
also
used to
link
the
TX7
and
DX tuning
functions:
Set
DATA
ENTRY RECEIVE
to
ON, call the
TX7 MASTER
TUNE function, and select the DX synthesizer MASTER TUNE function. Now the
DATA ENTRY control will
tune the
DX
and
TX7 in
perfect
synchronization.
Use the
N0/-1 and YES/
+
1
buttons
to
turn
DATA ENTRY RECEIVE
ON or
OFF.
Since this function and the DATA ENTRY VOLUME function cannot be active si-
multaneously, the latter will automatically be turned OFF when the former is turned
ON.
"MIDI RCV. CH.
1
"
This
function
determines on which of the 16 available
MIDI
channels the TX7
will receive
MIDI
data (when the OMNI MODE, below, is OFF). The desired MIDI
channel
number is
set
using the
N0/-1
and
yes/
+
1
buttons.
The TX7
always transmits on
MIDI
channel
1.
*The DX9, DX7, DX1, KX1
, etc.
alt
transmit
on
MIDI channel 1
.
"OMNI
MODE
OFF
"
This is the OMNI
MODE switch. When the
OMNI MODE
is
OFF, MIDI
reception
occurs
only over the MIDI channel specified in the
MIDI
RECEIVE
CHANNEL
function, above.
When
the
OMNI MODE
is ON,
MIDI data is received on all MIDI
channels
simultaneously.
N0/-1
and
YES/+1
select the desired
mode.
"D. ENTRY VOL OFF"
Turning this function
ON
makes it possible to control the TX7 volume via the DX
synthesizer
DATA
ENTRY control. Press YES/
+
1 to turn this function
ON
and
N0/-1 to turn It OFF. Since this function and
"D. ENTRY
RCV. ON" cannot be
active
simultaneously, the
latter will
automatically be
turned
OFF
when
the
former is turned
ON.
"CTL. CHNG.
RCV. OFF"
When this function is ON, the
TX7 is capable of
receiving
the
following
real-time
control data from the DX synthesizer:
Modulation
Wheel
Breath Controller
Foot
Controller
Portamento Time
25