Why does my Yamaha VF225LA trim gauge always show fully tilted up?
If the trim gauge always shows the fully tilted-up position, the trim sensor signal isn't being received. Connect the pink lead connectors with each other.
General| Engine Type | 4-Stroke |
|---|---|
| Maximum Output | 225 hp |
| Prop Shaft Horsepower | 225 hp |
| Full Throttle RPM Range | 5000-6000 RPM |
| Fuel Induction System | EFI (Electronic Fuel Injection) |
| Lubrication System | Wet sump |
| Starting System | Electric |
| Cooling System | Water-cooled |
| Gear Ratio | 1.86:1 |
| Cylinders | 6 |
| Steering | Remote |
| Alternator Output at W.O.T. | 70 Amp |
| Fuel Type | Regular unleaded (minimum 87 octane) |
| Exhaust | Through propeller hub |
| Ignition | TCI |
| Recommended Engine Oil | Yamalube 4M |
| Gear Shift | F-N-R |
| Shaft Length | 25 inches |
| Alternator Output | 70 Amp |
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates special precautions that must be taken to avoid damage to the products or other property.
Procedure for safely removing the outboard motor from its steel frame crate.
Instructions for mounting the outboard motor onto the boat transom, including height and alignment.
Procedures for installing gauges, ensuring readability and proper clearance behind the panel.
Details on analog tachometer applications, dimensions, and pole number setup.
Information on digital tachometer applications, dimensions, and pole number setup.
Covers speedometer types, applications, dimensions, and tube routing.
Explains fuel management gauge functions, types, dimensions, and setup.
Provides specifications for suitable batteries based on engine type and charging voltage.
Table showing recommended battery cable lengths based on applicable models and conductor size.
Wiring examples for single battery, twin battery, and isolator equipped models.
Lists the contents of conventional rigging kits for various engine models.
Details the contents of rigging kits for digital network gauges for different regions and styles.
Lists the contents of rigging kits for immobilizer units for various engine applications.
Details types of Yamaha propellers and their matching to outboard motors.
Guidance on selecting the appropriate propeller based on operating load and boat type.
Lists standard propeller applications for various engine models and horsepower ratings.
Describes different types of Yamaha remote controls, including mechanical and digital systems.
Lists various switch panels like combination, independent, and PTT switches.
Lists models compatible with digital network gauges for 4-stroke and HPDI engines.
Describes the application of digital network gauges, including square and round styles.
Information on the immobilizer unit and its acceptable models.
Provides wiring diagrams for various network configurations (single, twin, triple, quad engines).
Instructions for initial setup of digital network gauges, especially when multiple engines are installed.
Table of common issues, causes, measures, and notes for digital network gauges.
Table outlining the functions of the digital network gauge (6Y8) for various models.
Lists models compatible with Digital Network Premium Gauge (6Y9 new network system).
Describes the application of digital network premium gauges with TFT-LCD screens.
Explains the wire color codes and their main usage for Yamaha and ABYC standards.
Wiring diagram for digital meter (6Y5) in a single engine application.
Wiring diagram for digital meter (6Y5) with side-mount RC.
Wiring diagram for digital meter (6Y5) with binnacle RC.
Describes the multi-function tiller handle and its electrical functions.
Details the kit contents for the multi-function tiller handle for US models.
Details the kit contents for the multi-function tiller handle for Japanese models.
Details the kit contents for the multi-function tiller handle for EU & ANZ models.
To Next Page
