Need help?Do you have a question about the Yamaha VMX12 93 and is the answer not in the manual?
General| Year | 1993 |
|---|---|
| Manufacturer | Yamaha |
| Model | VMX12 |
| Compression Ratio | 10.5:1 |
| Fuel System | Carburetor |
| Transmission | 5-speed |
| Final Drive | Shaft |
| Front Suspension | Telescopic fork |
| Rear Suspension | Dual shocks |
| Rear Brake | Single disc |
| Seat Height | 765 mm |
| Category | Cruiser |
| Engine Type | V4, four-stroke |
| Engine Displacement | 1198 cc |
| Bore x Stroke | 76.0 x 66.0 mm |
| Front Brake | Dual disc |
| Fuel Capacity | 15.0 L |
Instructions indicating potential severe injury or death if not followed.
Step-by-step instructions for removing the front fork components from the motorcycle.
Detailed steps for disassembling the front fork, including draining oil and removing parts.
Procedures for inspecting inner/outer fork tubes, fork spring, damper rod, and oil lock piece.
General notes for reassembly and the first step of installing the damper rod.
Lubrication, installation of piston metal/oil lock piece, and tightening damper rod bolt.
Steps for installing the front fork assembly, tightening pinch bolts, and adjusting air pressure.
Installing the caliper assembly, brake hose holder, and speedometer cable.
To Next Page