Equipment operation
49
To use the fire extinguisher holder and cover:
(1) Pull the hood latch up, and then lift up
the rear of the hood.
(2) Unhook the band and remove the fire ex-
tinguisher from the fire extinguisher cov-
er.
(3) Place the fire extinguisher in the fire ex-
tinguisher cover, and then securely fas-
ten the fire extinguisher with the band.
(4) Return the hood to its original position,
and then push the hood latch down to
securely lock it in place. Make sure that
the hood is securely closed before using
the watercraft.
1 Hood latch
1 Band
2 Fire extinguisher holder and cover
UF4E74E0.book Page 49 Wednesday, July 17, 2019 4:26 PM
To Next Page
Loading...
Need help?
General