Maintenance
88
*1: Whichever comes first.
*2: Check every 200 hours.
Perform the pre-operation checks and post-operation checks before performing periodic
maintenance.
Exhaust system
Check for exhaust leak-
age, and check hoses and
clamps
√ —
Breather hose
Check breather hose and
clamps
√ —
Impeller
Check for bends, dam-
age, and foreign material
√ —
Jet thrust nozzle
Check movement, and lu-
bricate
√ —
Jet vacuum bilge
Check hoses for clogs
and damage, check
clamps, and clean bilge
strainer
√ —
Stern drain plugs Check O-rings √ —
Anode
Check for corrosion, and
clean
√ *2 —
Valve clearance Check and adjust √ *2 —
Rubber coupling
Check for cracks, inden-
tations, looseness, and
noise
√ —
Engine mount
Check for damage and
peeling
√ —
Item Operation
Initial Thereafter every
Page
10 hours
50 hours
or 12
months
*1
100
hours or
12
months
*1
200
hours or
24
months
*1
UF4E74E0.book Page 88 Wednesday, July 17, 2019 4:26 PM
To Next Page
Loading...
Need help?
General