5-28
5
Moving a rear seat to its original position
1. Open the seat belt buckle storage com-
partment cover and lift up the seat belt
buckles.
2. Install the seat belt buckle storage com-
partment cover.
3. While pulling the seat lock lever, slide the
seat rearward completely until it locks in
place.
4. Place the seat cushion in its original posi-
tion.
Opening and closing the tailgate
ECB02100
The tailgate is not designed to hold heavy
loads when open. The tailgate could col-
lapse if you put heavy cargo or sit on it.
To open
Pull the latch, and then lower the tailgate.
1. Buckle
1
1
1. Tailgate
2. Latch
1
2
UBAR11E0.book Page 28 Monday, July 27, 2020 4:42 PM
To Next Page
Loading...
