INSTRUMENT AND CONTROL FUNCTIONS
4-14
4
this system regularly and have a
Yamaha dealer repair it if it does not
function properly.
EAU15314
Ignition circuit cut-off system
The ignition circuit cut-off system (com-
prising the sidestand switch, clutch
switch and neutral switch) has the fol-
lowing functions.
● It prevents starting when the trans-
mission is in gear and the side-
stand is up, but the clutch lever is
not pulled.
● It prevents starting when the trans-
mission is in gear and the clutch le-
ver is pulled, but the sidestand is
still down.
● It cuts the running engine when the
transmission is in gear and the
sidestand is moved down.
Periodically check the operation of the
ignition circuit cut-off system according
to the following procedure.
TIP
This check is most reliable if performed
with a warmed-up engine.
U1BF11E0.book Page 14 Tuesday, April 13, 2010 9:28 AM
To Next Page
Loading...
