FOR YOUR SAFETY – PRE-OPERATION CHECKS
5-2
5
Clutch
• Check operation.
• Lubricate cable if necessary.
• Check lever free play.
• Adjust if necessary.
7-20
Throttle grip
• Make sure that operation is smooth.
• Check cable free play.
• If necessary, have Yamaha dealer adjust cable free play and lubricate cable and
grip housing.
7-17, 7-25
Control cables
• Make sure that operation is smooth.
• Lubricate if necessary.
7-25
Wheels and tires
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
7-18, 7-20
Brake and shift pedals
• Make sure that operation is smooth.
• Lubricate pedal pivoting points if necessary.
7-26
Brake and clutch levers
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
7-26
Sidestand
• Make sure that operation is smooth.
• Lubricate pivot if necessary.
7-27
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
—
Instruments, lights, signals
and switches
• Check operation.
• Correct if necessary.
—
Sidestand switch
• Check operation of ignition circuit cut-off system.
• If system is not working correctly, have Yamaha dealer check vehicle.
4-13
ITEM CHECKS PAGE
U1BF11E0.book Page 2 Tuesday, April 13, 2010 9:28 AM
To Next Page
Loading...
