Yamaha YAS-107 User Manual

42 pages

To Next Page

UAB

Front Surround System

Owner’s Manual

English

Français

Español

XXX

Other manuals for Yamaha YAS-107

Update Guide7 pages

Questions and Answers:

C
Charles TaylorJul 28, 2025
Why is the red indicator flashing on my Yamaha Speaker System?
- M
  Mark ColeJul 28, 2025
  If the red indicator on your Yamaha Speaker System is flashing, it could be due to the USB flash drive not being correctly connected. To resolve this, terminate the update by touching 'z', then properly connect the USB drive, and try the firmware update again. Another cause might be that the firmware data file was not properly saved to the USB drive. In this case, terminate the update by touching 'z', disconnect the USB drive, ensure the file name hasn't been changed and is stored in the root folder, then reconnect the USB drive and retry the update.

Yamaha YAS-107 Specifications

General

Audio Channels	2.1
Surround Sound	dolby pro logic ii, dolby digital
Maximum Frequency Response	23 kilohertz
Minimum Frequency Response	60 hertz
Inputs	3.5mm audio, hdmi, optical digital audio, subwoofer, usb
Outputs	hdmi, subwoofer, micro-usb
HDMI Inputs	1
HDMI Outputs	1
USB Ports	0
Bluetooth	yes
Wireless Connectivity	bluetooth
Optical Audio Inputs	1
Remote Control	yes

Weight and Dimensions

Depth	5.2 inches
Height	2.1 inches
Width	35 inches
Net Weight	7.5 pounds

Summary

Key Safety Instructions

Graphical Symbols Explanation

Explains symbols used in the manual to alert users to potential hazards or important information.

Regulatory Compliance Notices

General Safety Precautions

Power Cord Safety

Details safety instructions for the power cord and plug to prevent fire, shock, or damage.

Environmental and Battery Safety

Advises against water exposure, flammable items, and covers battery handling precautions.

Installation and Wireless Unit Safety

Provides guidelines for safe wireless unit operation and proper installation.

Abnormality Handling and Power Safety

Instructs users on immediate actions for unit abnormalities and power cord usage.

Hearing Protection, Maintenance, and Handling

Covers hearing loss prevention, safe maintenance, and cautions for handling the unit and small parts.

Operation and Environmental Notices

Operation and Connection Notices

Highlights points to prevent product failure and protect the environment regarding operation and connections.

Product Disposal and Identification

Trademarks and Manual Guide

Included Accessories

Remote Control Usage

Remote Control Setup and Range

Instructions on preparing the remote control and details its operating range and angle.

Replacing the Remote Battery

Step-by-step guide on how to replace the battery in the remote control.

Product Features Overview

User FAQs

Unit Components

Front and Top Panel

Identifies and explains the indicators, input selection, volume, and power controls on the front/top panel.

Rear Panel Ports

Details the various input and output jacks located on the rear of the unit.

Unit Installation

TV Stand and Wall Mounting Options

Guides on positioning the unit for TV stand placement and provides steps for wall mounting.

Wall Mounting Procedure

Specifies hardware and initial steps for securely mounting the unit onto a wall.

Wall Mount Assembly

Details attaching spacers and hanging the unit onto the installed screws for wall mounting.

Device Connections

TV and Set-Top Box Connectivity

Explains how to connect the unit to a TV and playback devices using HDMI and optical cables.

Analog Audio Connections

Describes connecting devices without digital output using the analog input jack.

Subwoofer and Power Hookup

Details connecting an external subwoofer and the power cable to the unit.

Unit Operations

Remote Control Basics

Explains the operation of the power and input selection keys on the remote control.

Surround and Stereo Modes

Describes how to switch between surround and stereo playback modes using dedicated keys.

Audio Enhancement Settings

Details enabling Clear Voice, Bass Extension, and Bluetooth standby functions.

Volume, Mute, and Indicators

Covers adjusting volume, muting audio, and understanding the decoder status indicator.

HDMI Control for TV Operation

Explains how to use the TV's remote to control unit functions like power, input, and volume.

Bluetooth Audio Streaming

Bluetooth Device Pairing

Guides on selecting Bluetooth input and enabling Bluetooth on the device for wireless audio.

Managing Bluetooth Connections

Details selecting the unit from the device list, pairing, and terminating Bluetooth connections.

Bluetooth Standby and App Usage

Describes enabling automatic power control via Bluetooth and using the smartphone app.

Unit Settings

HDMI Control and Audio Output

Guides on enabling HDMI control and specifying HDMI audio output destination.

Auto Power Standby and Initialization

Details enabling auto power standby and resetting the unit to factory defaults.

Troubleshooting Guide

Power and System Issues

Addresses issues like sudden power off, inability to turn on, and indicator problems.

Unit and App Functionality

Solves problems like unit freezing, unexpected power on, app control failure, and 3D glasses issues.

Audio Performance Troubleshooting

Covers problems like no sound, no subwoofer sound, and volume changes upon turn-on.

Sound Quality and Remote Control

Troubleshoots missing surround, noise, video display problems, and remote control non-responsiveness.

Bluetooth Connection and Audio

Solves issues with connecting to Bluetooth devices and intermittent audio cutoffs.

Product Specifications

HDMI Signal Compatibility

Details supported audio and video signal types, resolutions, and formats for HDMI connections.

Guarantee Information

Related product manuals