Do you have a question about the Yamaha YBR250 and is the answer not in the manual?
Displacement | 249 cc |
---|---|
Bore x Stroke | 74.0 mm x 58.0 mm |
Compression Ratio | 9.8:1 |
Fuel System | Fuel Injection |
Ignition System | TCI (Transistor Controlled Ignition) |
Front Suspension | Telescopic fork |
Rear Suspension | Swingarm |
Front Brake | Hydraulic single disc |
Rear Brake | Drum |
Seat Height | 780 mm |
Overall Height | 1, 065 mm |
Starting System | Electric |
Final Drive | Chain |
Wheelbase | 1, 360 mm |
Ground Clearance | 175 mm |
Engine Type | 4-stroke, air-cooled, SOHC |
Transmission | 5-speed |
Rear Tire | 130/70-17 |
Maximum Torque | 20.5 Nm @ 6, 500 rpm |
Maximum Power | 15.4 kW (21.0 PS) @ 7, 500 rpm |
Explains symbols like WARNING, NOTICE, and TIP for important information.
Emphasizes owner's role and safe riding techniques for motorcycle operation.
Details required apparel and avoiding hazards like CO poisoning.
Advice on cargo, accessories, and vehicle load limits to ensure stability.
Warnings about potential safety hazards from aftermarket parts and tire choices.
Identifies key components of the motorcycle from the left side view.
Identifies key components of the motorcycle from the right side view.
Locates handlebar controls, levers, pedals, and dashboard instruments.
Explains ON, OFF, and LOCK positions of the main switch and steering lock.
Describes the purpose of various dashboard indicator and warning lights.
Explains how the speedometer and tachometer indicate vehicle speed and engine RPM.
Details the odometer, tripmeters, fuel meter, and clock functions.
Explains how to switch between and reset tripmeters, odometer, and set the clock.
Explains the operation of left and right handlebar switches like horn, turn signals, etc.
Covers the operation of clutch lever, brake lever, shift pedal, and brake pedal.
Instructions for fuel tank cap removal/installation and checking fuel level.
Information on recommended fuel and catalytic converter warnings.
Instructions for removing, installing, and using the seat and helmet holder.
Details storage compartment use and how to adjust shock absorber assemblies.
Explains luggage strap holders and sidestand operation and safety.
Explains the functions of the ignition circuit cut-off system.
Provides a procedure to check the proper functioning of the ignition system.
Introduces the owner's tool kit and periodic maintenance schedules.
Details maintenance checks for the emission control system at specified intervals.
Outlines general checks and lubrication for various motorcycle components.
Step-by-step guide for removing and installing motorcycle body panels.
Procedures for checking and replacing the spark plug for engine health.
Instructions for checking engine oil level and changing oil and filter.
Guide on how to clean the air filter element to maintain engine performance.
Procedures for adjusting engine idling speed and throttle cable free play.
Information on valve clearance adjustment and tire specifications.
Guidelines for checking tire condition, tread depth, and approved tire models.
Advice on cast wheels and adjusting clutch lever free play.
Instructions for adjusting brake pedal position and free play.
Procedures for adjusting the rear brake light switch and checking brake pads/shoes.
Guidance on checking and maintaining front brake fluid level.
Procedures for changing brake fluid and checking drive chain slack.
Steps for cleaning the drive chain and lubricating control cables.
Lubrication procedures for throttle grip, brake, and shift pedals.
Lubrication guidelines for brake/clutch levers and the sidestand.
How to check the rear suspension and front fork condition/operation.
Procedures for checking steering bearings and wheel bearings.
Guidelines for battery maintenance, charging, and storage.
Instructions for safely replacing main and circuit fuses.
Step-by-step guide for replacing the headlight bulb.
Procedures for replacing turn signal and auxiliary light bulbs.
How to safely support the motorcycle and service the front wheel.
Detailed steps for removing and installing the front wheel.
Detailed steps for removing and installing the rear wheel.
Introduces troubleshooting steps for common motorcycle issues.
A chart guiding diagnosis of starting and running problems.
Recommendations for cleaning the motorcycle safely and effectively.
Advice on preventing corrosion, especially after riding in harsh conditions.
Instructions for short-term and long-term storage of the motorcycle.
Technical specifications for motorcycle dimensions, weight, and engine details.
Technical specifications for chassis, suspension, wheels, and brakes.
Technical specifications for lighting, ignition, battery, and fuel system.
Information on locating and recording vehicle identification numbers.
Instructions for recording model label details for spare parts.