Yamaha YZF-R1 Assembly Instructions

Thank you for downloading the "YZF-R1" paper craft model. By simply
following this manual while referring to the names and numbers shown on the
parts sheets, you can assemble an authentic-looking replica of the YZF-R1.
Assembly instructions: Fifteen A4-sized sheets.
Paper craft: Fourteen A4-sized sheets with 170 parts in all
PAPER CRAFT
Assembly Instructions
These instructions apply only to the "YZF-R1".
These Paper Craft parts are easier to work with when printed out on strong,
thick paper (like postcard stock).
*In creating these Paper Craft models we use 135kg Kent paper stock (0.18mm).

Yamaha YZF-R1 Specifications

General

Bore x Stroke	79.0mm x 50.9mm
Compression Ratio	13.0:1
Fuel System	Fuel injection with YCC-T and YCC-I
Final Drive	Chain
Front Tire	120/70ZR17
Rear Tire	190/55ZR17
Wheelbase	55.3 in
Fuel Capacity	4.5 gal
Curb Weight	448 lb
Width	27.2 in
Ground Clearance	5.1 in
Engine Type	Liquid-cooled inline 4-cylinder; DOHC, 4 valves per cylinder
Transmission	6-speed
Clutch	Multiplate slipper clutch
Front Suspension	43mm KYB® inverted fork; fully adjustable
Rear Suspension	KYB® single shock; fully adjustable
Front Brakes	Dual 320mm hydraulic disc; ABS
Rear Brakes	220mm hydraulic disc; ABS