13
Fig. 2: Location of mass center, fastening onto trailer and dimensions of storage cradle
4.2 DOCKING
The storage cradle should be sufficiently steady and suitable for the boat's dimensions. The
keel supports should carry most of the boat's weight. Point loads should be avoided. The
length of keel supports and the dimensions of side paws should be at least as shown in figure
2. Adjust the side supports so that the boat does not sway sideways, and so that the paws do
not hit the fillets. The preliminary location of the supports is shown in figure 2.
Only use reputable hoisting companies or boat yards with sufficient hoisting capacity. In
addition to the boat's own weight (see chapter 5), take also the accessories and other possible
load in the boat into account. The mass center with engine mounted is indicated in figure 2.
WARNING!: Do not go under the boat when it is hanging from the crane.
5. SPECIFICATIONS
Every boat has an individual serial number. It is marked in the right-hand side of the transom
plate. When dealing with the manufacturer or the dealer, always mention this number to help
in delivering the right spare parts. When ordering gelcoat, also inform the colour code.
Boat type identification YAMARIN 4730
Serial number
Serial number of engine
Colour codes hull 7289
deck 8533
To Next Page
Loading...
Need help?
General
