To Next PageTo Next Page
Need help?Do you have a question about the Yamato AZ7000SDR-8 and is the answer not in the manual?
General| Model | AZ7000SDR-8 |
|---|---|
| Needle | 1 |
| Bed Type | Flat Bed |
| Machine Weight | Approx. 35 kg |
| Weight | Approx. 35 kg |
Details and table cutting diagram for installing the semi-submerged machine type.
Details and table cutting diagrams for installing the fully-submerged machine type.
Instructions for installing and selecting motor, pulley, and belt components.
Guidance on installing belt cover, eye guard, and finger guard for operator safety.
Information on recommended oil and procedures for lubricating machine parts.
Steps for changing lubricating oil and maintaining the oil filter.
Selecting the correct needle system and instructions for installing needles.
How to adjust thread tension for optimal stitch quality.
Instructions for adjusting presser foot pressure and release.
Guide to adjusting the differential feed dog for fabric stretching or gathering.
Steps for adjusting the stitch length on the sewing machine.
Information on the SP (needle thread oiling) and HR (needle point cooling) devices.
Daily and weekly maintenance cleaning procedures for the sewing machine.
How to set needle thread tension for overlock stitching.
How to set looper thread tension for overlock stitching.
How to set needle thread tension for double chainstitch.
How to set looper thread tension for double chainstitch.
Instructions for adjusting the width of the overedge seam.
Adjustments related to the engagement and height of cutting knives.
Setting the correct height for the main and differential feed dogs.
How to adjust the tilt of the feed dog for proper feeding.
Adjustments for needle and looper positioning, parallelism, and timing.
Adjusting rear and front needle guards for AZ7000SDR-8 class machines.
Adjusting rear and front needle guards for AZ7500SDR-8 class machines.
Setting the correct position and clearance for the presser foot.
Overview of the SC10 self-cleaning system and its function.
How to adjust the air deflector for optimal ventilation based on sewing conditions.
Procedures for installing the SC10 device components like air deflector and screens.
Adjusting the engagement between upper and lower trimming knives.
Lubrication instructions for the K2 device components.
Technical specifications for the AZ7000SDR-8 class of sewing machines.
Technical specifications for the AZ7500SDR-8 class of sewing machines.
