To Next PageTo Next PageWhy is the temperature slow in rising in my Yamato DNF 400 Oven?
The temperature in your Yamato Oven might be rising slowly due to several reasons. It could be that the damper is opened, in which case you should close it. Another potential cause is an issue with the controller or temperature sensor, in which case you should replace the controller or the sensor. Finally, check if too many samples are loaded.
What to do if the Yamato DNF 400 temperature does not rise?
If the temperature in your Yamato Oven isn't rising, it could be due to an open damper; make sure to close it. Alternatively, the safety device in the independent overheating prevention device or self-diagnosis function might be activated, shutting off the heater circuit (indicated by an error code).
What to do if the operation panel indicates none when the power key is pressed on Yamato Oven?
If the operation panel on your Yamato Oven shows nothing when you press the power key, it could be due to a problem with the power source. Ensure it's connected to the appropriate power source. It may also indicate a controller failure, in which case you should replace the controller.
Why is the temperature indication instable on my Yamato DNF 400 Oven?
An unstable temperature indication in your Yamato Oven could be due to variable ambient temperature or the effect of the sample. It may also indicate a controller or temperature sensor failure, in which case you should replace the controller or the sensor.
How to fix the Yamato Oven sub indicator if it does not indicate current date and time?
If the sub indicator on your Yamato Oven isn't showing the current date and time, first check the power connection and ensure the electricity is turned on. If that's not the issue, it could be an earth leakage breaker failure or a controller failure, in which case you should replace the breaker or the controller.
General
