OXYGEN CONCENTRATOR USER MANUAL
9
a. Put into the distilled water as the water level instructions.Fix the
cover to the body
（
Figure 1
）；
b. Screw the humidifer into the oxygen outlet by counterclockwise. Since
the humidifer is hanging, make sure it is securely screwed onto the outlet
port (see Figure 2).
Notice：The best installation place as figure 2
3
、
Remove the AC power line from the retaining strip, confirm the sw
itch in the off position. Insert the plug into the indoor power
outlet at this time.
4
、
Medical oxygen concentrator with the equipment to monitor
Highest Water Level
Lowest Water Level
Fix the humidifer by screw,
please take off when don’t
use
（
Figure1
）
（
Figure 2
）
Safety Valve（Inside）
Intake Air Connector
Oxygen Exit
Bottle Body
To Next Page