O P E R AT I O N & M AI N T E N AN C E M AN U A L
1 Compress pressure in cylinder is too
low
Reference to fifth solution of first fault, replace a
new part if exceed its wear limit
2 delivery fuel advance angle incorrect
Adjust according to specifications
3 clearance between air valves is
incorrect
Adjust according to specifications
4 fuel supply imbalance among every
cylinder
Adjust injection pumps to proper supply
6 fuel injection pumps, fuel injector sets
worn off or fuel injection pressure
incorrect
Replace them with new patrts,adjust fuel injection
pressure and check fuel spray
adjust the speed control handle, make the
speed to reach rated speed
reduce the load, if they are unsuitable
matching , adjust it
check the spray pressure and atomization, if
the
fuel pump is damaged, replace it
3 inferior quality of fuel
Main reason is :fuel pump atomizes bad,
delivery fuel advanced angle incorrect ,
leakage at cylinder cover gaskets and low
compression pressure. solute in accordance
with specific problems