Yanmar 6LY2A-STP - Checking and Resupplying Lube Oil and Cooling Water

_
24
_
3.2.6 Checking and Resupplying Lube Oil and Cooling Water
When engine lube oil, marine gear lube oil or fresh water is supplied for the first time or they have
to be replaced, conduct trial operation of the engine for about 5 minutes and check the quantity of
lube oil and fresh water. The trial engine operation will send the Iube oil and cooling water to the
parts, so the lube oil and fresh water levels will fall. check and resupply lube oil and fresh water as
necessary.
1) Resupplying engine lube oil (See 3. 2. 2.)
2) Resupplying lube oil to marine gear (for Yanmar model : KMH6A, KMH6A1) (See 3. 2. 3.)
3) Resupplying fresh water (See 3. 2. 4.)