PRODUCT OVERVIEW
6LY3 Operation Manual 33
Engaging / Disengaging Cruise
Synchronization
Figure 16
Engage:
(a) Disengage any other engine mode
being used.
(b) Match all engine shift and throttle
settings by moving the active port
and starboard control head levers to
within 10% of each other
(Figure 16, (1)) and press the SYNC
button (Figure 16, (2)) on the control
head. The sync lamp flashes if the
handles are not within 10% of each
other (Figure 16, (3)). The sync
lamp will stop flashing and remain
continuously lit (Figure 16, (4))
when the levers are moved to within
this 10% range.
A steady sync lamp confirms that the
Cruise Sync is engaged. While the
engines are synchronized, all engine
speeds are matched any time the
control levers are set to within 10%
of each other and are above 20%
throttle.
Disengage:
Press the SYNC button on the control
head.
To Next Page
Loading...
