Yanmar YM155d - Page 62

Fuel oil'pump:
0 Fit rack to notch and attach pump
0 Insert injection timing control shims
to prescribed thickness.
The following should
be done before the
0 Lube oil pipe;
TWO
poirnr on the cylinder black
0 Lube oil pressure witch
0 Lube oil dipstick
2) Coat oil real with lubeoil, and push-fit
the crankshaft
V-pulley. raking care not to
damage lip section of oil real.
3) Lube oil pressure control valve and
lube oil filter.
4) V-pulley: to crankshaft
5) Hour meter gear unit
6) Hydraulic pump