Need help?Do you have a question about the YAQIN MC-100B and is the answer not in the manual?
General| Input Impedance | 100kΩ |
|---|---|
| Output Impedance | 4Ω, 8Ω |
| Signal-to-Noise Ratio | 90dB |
| Tubes | KT88 x 4, 12AX7 x 2, 12AU7 x 2 |
| Dimensions | 430 x 320 x 180mm |
| Weight | 17kg |
| Power Consumption | 280W |
| Input Sensitivity | 350mV |
| Frequency Response | 20Hz - 20kHz |
| Total Harmonic Distortion | < 1% |
| Power Supply | AC 220V |
| Type | Integrated Tube Amplifier |
Allows selection of audio sources like TAPE, DVD, CD, and TUNER.
Connects external pre-amplifiers for left and right channels.
Switches between Packed and Pro modes based on input voltage.
Adjusts the amplifier's audio output level.
Identifies the power switch on the side of the unit.
Details input voltage and fuse rating for power connection.
Connects amplifier outputs to speakers via terminals (+/-).
Lists input jacks for TAPE, DVD, CD, and TUNER.
Switches between Ultralinear and Triode modes for sound output.
Identifies test points for measuring valve bias voltage.
Details the holes for regulating valve bias.
Step-by-step guide to measuring valve bias using a meter.
Procedure for adjusting valve bias for optimal performance.
Lists common problems (no power, no sound, noise) with checks.
Warns against use in rain or damp places to prevent shock.
Outlines the warranty period for the unit and its valves.
To Next Page
