MAINTENANCE
• After each use clean
Rinse/dry inside and outside of the spreader after each use.
Before operating make sure the tires have the RECOMMENDED
Annually clean and lightly lubricate parts.
Never exceed load capacity rating of
If a part needs replacement, only use parts that meet the manufacturer
not meet specifications may result in a safety hazard or poor operations
Never allow material to remain in the hopper for extended periods of time.
Before storing make sure the spreader is clean and dry for years of trouble free service.
maintain the proper tire pressure.
injury may result. ALWAYS
Rinse/dry inside and outside of the spreader after each use.
Before operating make sure the tires have the RECOMMENDED
Annually clean and lightly lubricate parts.
t to touch up scratched or worn painted metal surfaces.
Never exceed load capacity rating of
125lbs it will damage the spreader.
If a part needs replacement, only use parts that meet the manufacturer
s specifications. Replacement parts
not meet specifications may result in a safety hazard or poor operations
Never allow material to remain in the hopper for extended periods of time.
Before storing make sure the spreader is clean and dry for years of trouble free service.
during severe weather and winter months.
maintain the proper tire pressure.
over or under inflate the tires as serious
t to touch up scratched or worn painted metal surfaces.
s specifications. Replacement parts
Before storing make sure the spreader is clean and dry for years of trouble free service.
over or under inflate the tires as serious