EasyManuals Logo

Yard Works AutoDrive 60-1827-4 User Manual

Default Icon
53 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
feature is a reminder not to cut
in
reverse and
to help avoid back over accidents. Do not
defeat it.
g.
Keep children away from hot or running
engines. They can suffer burns from a hot
muffler.
h.
Remove key when machine
is
unattended to
prevent unauthorized operation.
i.
Never allow children under 14 years old to
operate the machine. Children 14 years old
and over should read and understand the
operation instructions and safety rules
in
this
manual and should
be
trained and supervised
by a parent.
TOWING
1.
Tow only with a machine that has a hitch designed
for towing. Do not attach towed equipment except at
the hitch
pOint.
2.
Follow the manufacturers recommendation for
weight limits for towed equipment and towing
on
slopes.
3.
Never allow children or others in or
on
towed
equipment.
4.
On slopes, the weight of the towed equipment may
cause loss of traction and loss of control.
5.
Travel slowly and allow extra distance to stop.
6.
Do not shift to neutral and coast downhill.
SERVICE
SAFE HANDLING
OF
GASOLINE:
1.
To
avoid personal injury
or
property
damage
use extreme care in handling gasoline. Gasoline is
extremely flammable and the vapors are explosive.
Serious personal injury can occur when gasoline
is
spilled on yourself or your clothes which can ignite.
Wash your skin and change clothes immediately.
a.
Use only
an
approved gasoline container.
b.
Never fill containers inside a vehicle or on a
truck or trailer bed with a plastiC liner. Always
place containers
on
the ground away from
your vehicle before
filling.
c.
When practical, remove gas-powered
equipment from the truck or trailer and refuel
it on the ground.
If this is not possible, then
refuel such equipment
on
a trailer with a
portable container, rather than from a
gasoline dispenser nozzle.
d. Keep the nozzle
in
contact with the rim of the
fuel tank or container opening at
all times until
fueling is complete. Do not use a nozzle lock-
open device.
e.
Extinguish all cigarettes, cigars, pipes and
other sources
of
ignition.
f.
Never fuel machine indoors.
g.
Never
remove~~::Q1i~.flle~while
the
engine is
hot or
runnirlg'AltoWengtJ;'l~
to cool
at least two
minutes
QefOre
re.fuellng.ยท
5
h.
Never over fill fuel tank. Fill tank to no more
than
Y2
inch below bottom of filler neck to
allow space for fuel expansion.
i.
Replace gasoline cap and tighten securely.
j.
If gasoline is spilled, wipe it off the engine and
equipment. Move unit to another area. Wait 5
minutes before starting the engine.
k.
To reduce fire hazards, keep machine free of
grass, leaves, or other debris build-up. Clean
up oil or fuel
spillage and remove any fuel
soaked debris.
I.
Never store the machine or fuel container
inside where there
is
an
open flame, spark or
pilot light as on
awater
heater, space heater,
furnace, clothes dryer or other gas
appliances.
m.
Allow a machine to cool at least 5 minutes
before storing.
GENERAL SERVICE:
1.
Never run an engine indoors or
in
a poorly
ventilated area. Engine exhaust contains carbon
monoxide, an odorless, and deadly gas.
2.
Before cleaning, repairing, or inspecting, make
certain the blade(s) and
all moving parts have
stopped. Disconnect the spark plug wire and ground
against the engine to prevent unintended starting.
3.
Periodically check to make sure the blades come to
complete stop within approximately (5) five seconds
after operating the blade disengagement control.
If
the blades do not stop within the this time frame,
your unit should
be
serviced professionally by
an
authorized dealer.
4.
Check brake operation frequently as it
is
subjected
to wear during normal operation. Adjust and service
as required.
5.
Check the blade(s) and engine mounting bolts at
frequent intervals for proper tightness. Also,
visually
inspect blade(s) for damage (e.g., excessive wear,
bent, cracked).
Replace the blade(s) with the original equipment
manufacturer's (O.E.M.) blade(s) only, listed
in
this
manual. "Use of parts which
do
not meet the original
equipment specifications may lead to improper
performance and compromise
safety!"
6.
Mower blades are sharp. Wrap the blade or wear
gloves, and use extra caution when servicing them.
7.
Keep all nuts, bolts, and screws tight to be sure the
equipment
is
in
safe working condition.
8.
Never tamper with the safety interlock system or
other safety devices. Check their proper operation
regularly.
9.
After striking a foreign object, stop the engine,
disconnect the spark plug wire(s) and ground
against the engine. Thoroughly inspect the machine
for any damage. Repair the damage before starting
and operating.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yard Works AutoDrive 60-1827-4 and is the answer not in the manual?

Yard Works AutoDrive 60-1827-4 Specifications

General IconGeneral
BrandYard Works
ModelAutoDrive 60-1827-4
CategoryLawn Mower
LanguageEnglish

Related product manuals