Page | 7
NATURAL GAS INSTALLATION AND SETUP
IMPORTANT SAFETY INFORMATION
NATURAL GAS CONVERSION KIT
*Not Provided: Natural gas hose with fitting for connection to manual gas control valve
INSTALLATION AND SETUP
Natural gas Installation and setup safety guidelines are continued on page 8
Natural Gas Supply Hose
Manual Gas Control Valve Fitting
LP Regulator Hose
Manual Gas Control Valve
Air Shutter
Natural Gas Brass Insert
Installation and setup of this appliance for the use of natural gas or house
hold propane fuel sources must be done by a NFI certified or other trained professional.
The instructions below are included for the trained installer. Do not set up your appliance for
this fuel source if you are not a trained professional.
Stop!
Installer: Before continuing, please make sure that the LP gas supply to the fire table is turned off, the
gas control knob is in the “OFF” position and any nearby electrical devices or other sources of ignition are
shut off.
Installer: Before continuing, please make sure that the LP gas supply to the fire table is turned off, the
gas control knob is in the “OFF” position and any nearby electrical devices or other sources of ignition are
shut off.
Disconnect the LP regulator hose from the
manual gas control valve
Attach the natural gas supply hose to the
fitting on the manual gas control valve
1. 2.
To Next Page
Loading...
Need help?
General