To Next PageTo Next PageWhat to do if my Yardgard Security System alarm is continuously sounding?
If your Yardgard Security System alarm is continuously sounding, make sure the sensor and magnet are no more than 0.75" apart. Also, ensure the door or gate is fully closed before pressing the PASS/RESET button. If the alarm beeps once every 30 seconds, replace the battery.
Why can't I turn off my Yardgard YG03 Security System alarm?
The Yardgard Security System alarm is designed to be always active. If a door remains open, the alarm will sound until the door is closed and the RESET button is pressed. Ensure the sensor and magnet are no more than 0.75" apart. If the wire to the sensor is cut or damaged, the anti-tamper mechanism will trigger the siren, and the battery will need to be removed to silence the alarm. Contact the manufacturer if the alarm is damaged.
Why is my Yardgard YG03 alarm rapidly beeping or clicking?
When the PASS/RESET button is pressed and the door is opened, the Yardgard Security System alarm provides 15 seconds to pass through the entry point, with rapid beeps as a warning to close the door. If you hear a rapid clicking noise, the battery may be critically low, so try changing the battery and testing the alarm.
What to do if my Yardgard YG03 alarm is not sounding?
If your Yardgard Security System alarm is not sounding, first ensure the battery is correctly installed. If it still doesn't work, the battery may be low and need replacement.
General| Detection Angle | 110 degrees |
|---|---|
| Battery Life | Up to 1 year |
| Weather Resistance | Yes |
| Type | Motion Detector |
| Power Source | Battery |
| Detection Range | 40 feet |
| Compatibility | Yardgard Security Systems |
Critical safety instructions for installation and operation, including risks of injury or death.
Detailed list of all parts included with the YardGard alarm system.
Overview of installation applications and necessary tools for the YG03 alarm.
Step-by-step guide for installing the battery and performing the initial alarm test.
Detailed instructions for mounting the alarm system on various gate types.
Procedure for attaching the alarm to metal or chain link fencing using spacers.
Instructions for mounting the alarm system on door or window casings and walls.
Procedures for testing, temporarily bypassing, and silencing the alarm system.
Details on immediate signaling, auto-reset, low battery, and non-operational indicators.
Guidelines for storing the alarm during winter months and regular battery replacement.
Solutions for common problems like continuous sounding, no sound, or rapid beeping.
Information regarding the warranty coverage, limitations, and claim procedure.
