EasyManuals Logo

Yardgard YG03 Installation & Operation Instructions

Yardgard YG03
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
Operation
This YARDGARD is designed to monitor the opening
of gate or door, to alert an adult if a child has opened
a gate or door to a potential dangerous area.
Check the battery. Press the CHECK button should
give a loud beep, otherwise replace with a new
battery. The unit will give a loud siren if gate or door
is opened by more than one inch.
For adult entry, press the PASS button. The unit will
allow the door be opened up to 7 seconds without
triggering alarm. However, if the gate or door is
opened for over 7 seconds, the alarm will trigger.
To reset the alarm, first close the door and then
press the PASS/RESET button. The alarm is now
back to stand by mode.
To exit the protected area, press the PASS/RESET
button and exit the area within 30 seconds.
Automatic Reset Under All Conditions
The unit will be reset automatically in 30 seconds
after the last key activation. If the PASS/RESET
button is pressed but the adult entry 7 seconds
allowance is not utilized, this adult entry allowance
will be canceled in 30 seconds, and reset to standby
mode automatically.

Other manuals for Yardgard YG03

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yardgard YG03 and is the answer not in the manual?

Yardgard YG03 Specifications

General IconGeneral
BrandYardgard
ModelYG03
CategorySecurity System
LanguageEnglish