Yardistry YM12863 - Page 51

51 support@yardistrystructures.com
F6.1
Side Wall with
Door Assembly
Step 6: Frame Assembly
Part 1
Remove lm from both sides of PC Wall Panel.
Note: UV
Coating to the
outside of the
frame
Note: Notches
always at the
bottom right of
each panel from
the outside
F6.2
Outside View
Components
1 x PC Wall Panel
Top Tape
Bottom Tape
Hardware
2 x #10 x 4” Wood Screw
S24
Side Wall with
Door Assembly
Side Wall with
Door Assembly
S24
PC Wall Panel
PC Wall Panel
PC Wall Panel
F6.3
Outside View
F6.4
Outside View
Tight
Flush
End Wall with
Gable Vent
Assembly
End Wall with
Gable Vent
Assembly
End Wall with
Gable Vent
Assembly
Notch
Refer to pages 17 and 18 and apply
top and bottom tape to PC Wall
Panel.